The new air-operated Burn Table Lift Magnet System from Eriez® moves multiple parts or cutouts up and off of burn tables. The transfer system also can lift single sheets or plates up to 3 in. thick from a stack to load the table.

When activated, a stainless steel stripper pan retracts to engage the steel parts with a high magnetic holding force. To release, air cylinders push the stripper pan away from the magnetic head to create a gap and break the holding force. Because the system uses permanent magnets and does not require a controller, there are no power failure concerns.

Standard models are available in 24-, 48-, and 120-in. designs to accommodate most common plate or sheet sizes.

—The 17^th China(Guangzhou)Int’l Heat Treatment,Industrial Furnace Exhibition